RHD S2000 ABS Relocation Kit
Finishing Lines RHD S2000 ABS Relocation brake line kit!
This kit is a plumbing solution for those wanting to relocate the ABS module from the engine bay to the driver's fender well in their RHD (Right Hand Drive) S2000. This will clean up a large amount of clutter from the driver's side frame rail area of the S2000 engine bay.
All lines needed to convert to a tucked ABS module setup are included in this brake line kit. Our ABS module placement with this kit utilizes the factory ABS module bracket and one factory threaded hole behind the fender. We suggest the addition of another bolt hole to more securely and rigidly mount the bracket. A riv-nut works perfect in this area as a second bolt hole solution. The passenger's front brake line will be routed above the steering rack area. Securing this line with a clamp (not included) is required to keep the line mounted properly as to not interfere with the steering rack operation.
***LIMITED AP2 APPLICATION FITMENT NOTE - DOES NOT FIT AP2 APPLICATIONS THAT HAVE TWO M12 PORTS ON THE ABS MODULE. ALL PORTS MUST BE M10 FOR PROPER FITMENT***
If you have an AP2 application with M12 ports on your module please email us @ Sales@Finishing-Lines.com before ordering.
Please allow 1-3 days for shipment. Brake hoses consist of a Teflon inner liner followed by a stainless braided covering and then finished with a poly outer coating for abrasion resistance to painted surfaces.